View TFS433L_1324616.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TFS433L.doc
version 1.4
10.04.01
VI TELEFILTER
Measurement condition
Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances: Input: Output:
Filter specification
TFS 433L
1/5
90 90
// -3,9 pF // -3,9 pF
Characteristics
Remark:
Reference level for the relative attenuation a rel of the TFS 433l is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae . The nominal frequency fN is fixed on 433,92 MHz without tolerance. The given values for the relative attenuation arel have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
Insertion loss (Reference level) Nominal frequency Centre frequency 2 dB bandwidth 3 dB bandwidth 6 dB bandwidth Relative attenuation fN ...... 200 fN fN fN fN fN fN fN fN KHz KHz KHz MHz MHz MHz MHz MHz MHz 200 KHz .... fN 220 220 KHz .... fN 280 - 1.0 MHz .... fN - 5,92 - 5,92 MHz .... fN - 19,92 - 19,92 MHz .... fN - 423,92 + 1,0 MHz .... fN + 8,0 + 8,08 MHz .... fN + 116,0 + 116,08 MHz . fN + 566,0
ae = amin fN fc BW BW BW arel
typ. value
-
Variation/ Limitation
max 3,5 433,92 min min min dB MHz
433,92MHz -
400 kHz 440 kHz 560 kHz
-0,028 [ppm/K ] 5 C
2
max 2 max max min min min min min min 3 6 15 40 45 10 35 45
dB dB dB dB dB dB dB dB dB
Temperature coefficient of the frequency TCf*) Frequency inversion temperature To) Operating temperature range Storage temperature range Input power level
*) fc(Hz) = Tcf(ppm/K) x (To - T A) x fCAT (MHz)
- 25 C ... + 80 C - 45 C ... + 120 C max 10 dBm
Generated
:
Checked / approved :
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 0075 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS433L.doc
version 1.4
10.04.01
VI TELEFILTER
Construction and pin configuration
(All dimensions in mm)
Filter specification
TFS 433L
2/5
5.0 SQ 7 5
+0.15 -0.1
433L N15
1 Date code
Pin 1 Pin 2 Pin 3 Pin 4 Input RF Return Input Ground Ground Pin Pin Pin Pin 5 6 7 8 Output Output RF Return Ground Ground
3
Datecode: L M N ....
Year+week 1999 2000 2001
50 Ohm Test circuit
L1 2 Input 50 Ohm C1 1 3,4,7,8 2 5 L2 Output C2 6 50 Ohm
SAW
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 0075 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS433L.doc
version 1.4
10.04.01
VI TELEFILTER
Stability Characteristics
Filter specification
TFS 433L
3/5
After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 25 C to 55C / 95% r.H. / 10 cycles DIN IEC 68 - 2 - 30 Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer
Tape (all dimensions in mm) W Po Do E F : : : : : 12 4 1,5 0,3 0,1 + 0,1
Ao F W Do Po
3000 min 300 mm min 500 mm min 300 mm
EMBOSSED CARRIER TAPE
P2
E
1,75 0,1 5,5 0,05 0,75
CT Bo
D1
G (min) : P2 P1 : :
2 8 1,5 5,30 5,30
0,05 0,10 0,1 0,1 0,2
COVER TAPE P1
G
D1(min) : Ao Bo CT : : :
13,0
W2
Reel (all dimensions in mm): A : 330 12,4 2,0 18,4 50 13 0.2
A C N
W1 : W2 (max) : N (min) C : :
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 0075 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS433L.doc
version 1.4
10.04.01
VI TELEFILTER
Air reflow temperature conditions
Filter specification
TFS 433L
4/5
1st and 2nd air reflow profile
Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 0075 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS433L.doc
version 1.4
26.01.2004
VI TELE FILTER
History
Version Reason of Changes
Filter Specification
TFS 433L - 5/5
Name
Date
1.0 1.1 1.2 1.3 1.4
-
generated specification according to customer requirement changing of input connection pin to 2 changing of operating temperature rang changing of tape size P1 chaging from developmet filter to filter specification add of terminating impedance
Dr. Sabah Dr. Sabah Dr. Sabah Dr. Sabah Dr. Sabah
17.05.2000 15.11.2000 01.12.2000 10.01.2001 10.04.2001
VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 5980075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information

▲Up To Search▲

Price & Availability of TFS433L

	To Download TFS433L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .